24 CHANNEL RELAY PLATE
The 24 Channel Relay Plate was built to be an all purpose resource to control numerous switch controllers and to interact with the 24 Channel Open Collector Card family (SS 276-116 & SS 276-117). This allows for smooth integration with your SPICE Automation system... ultimately letting your show toggle the necessary relay switches at will. Users can also create their own controls with panel switches. Each relay channel can be configured by independent (240 VAC, 5 amp maximum) dry contacts, each circuit offering Common, NormallyOpen, and Normally Closed relay options.
SPECIFICATIONS
INPUT/OUTPUT CONNECTIONS
Dry Relay 3 Pin Terminal Strip Connection points per relay channel. Silkscreened cover shows Contacts screw retained pinout: From left to right COM- Common Ground, (1-24) NO- Normal Open, NC- Normal Closed
12-20 VAC SUPPLY 5.5/2.5mm power adapter Connection to a 12VAC power adapter. The inner socket pin is hot (see power requirement specifications above).
15-25 VDC SUPPLY CONTROL Detachable Terminal -Dual Pin Strip/25 Pin Male Dshell Connection to a 15VDC power adapter. The right pin is hot (see power requirement specifications above). Connects to the NUTMEG 24 Channel Open Collector Card or to a custom manual control.
INTERNAL DISPLAYS
LED (1-24) Red LED indicator Indicates relay channel is closed
GENERAL CAPABILITIES
Each relay channel can be configured by independent (240 VAC, 5 amp maximum) dry contacts, each circuit offering Common, Normal Open, and Normal Closed relay options. Input control is 12 volts, buffered to allow a nominal 1.2mA pull to ground signal. This will activate any one relay.
MAXIMUM CABLE RUN
Dependent on load, 25 ft nominal.
POWER REQUIREMENTS
12 watts @ 110/220V, 50/60Hz Uses a 12VAC Power Adapter or optional 15 VDC power source
SS 4542 24 CHANNEL RELAY PLATE
SS 4542E 24 CHANNEL RELAY PLATE, export version